Skip to main content

Sperm quality after density gradient centrifugation with three commercially available media: a controlled trial

Abstract

Background

Density gradient is the preferred technique for sperm processing for ART. However, no study has examined sperm quality using different processing media simultaneously and under identical conditions. Therefore, we evaluated semen quality following sperm preparation by three commonly used commercially available density gradient media in a well-designed controlled trial.

Methods

We obtained semen samples from 20 healthy volunteers. Percent motility, total motile sperm (TMS), % recovery and DNA damage were assessed before and after separation in three different sperm density gradient media-PureCeption, ISolate and SpermGrad-125.

Results

Percent motility was higher in the ISolate (81.4% ± 6.6%) and SpermGrad-125 samples (85.7% ± 8.0%) (P < 0.0001) than in the PureCeption samples (62.5% ± 13.2%) (P = 0.07). TMS was higher in the PureCeption(TM) and ISolate samples (14.2% ± 15.9% and 15.8% ± 18.2%) than in those prepared with SpermGrad-125 (10.6% ± 19.7%) (P < 0.0001). Percent recovery was significantly higher in the PureCeption(TM) and ISolate samples (45.3% and 48.9%) than in the SpermGrad-125(TM) samples (30.8%) (P < 0.01). DNA fragmentation was comparable across the three gradients (PureCeption = 8.8% ± 4.7%; ISolate = 7.2 ± 5.2% and SpermGrad-125 = 11.2% ± 7.4%).

Conclusions

Three different density gradient processing media PureCeption, ISolate, and SpermGrad-125 were examined for their effects on sperm quality. Sperm processed by ISolate and Sperm Grad 125 had better motility and TMS after processing. The extent of DNA damage was comparable in all three gradients.

Background

Before sperm can be used in assisted reproductive techniques (e.g. intrauterine insemination or classic in vitro fertilization alone or combined with intracytoplasmic sperm injection), it must first be processed. The goal of processing is to select highly motile, morphologically normal spermatozoa with minimal DNA damage [13]. At the same time, cellular debris must be removed, including round cells, epithelial cells, white blood cells as well as immature or morphologically abnormal spermatozoa that are immotile or have poor motility. Migration based protocols include the swim up or the swim down techniques. In the swim up technique, the highly motile sperm migrate out into the clear culture medium [4, 5]. In the swim-down technique the motile sperm migrate down the discontinuous gradient commonly prepared using bovine serum albumin. Spermatozoa are layered on the top of the albumin gradient. Although this is a relatively inexpensive technique the sperm recovery is very poor.

Sperm preparation by density gradient centrifugation separates sperm cells based on their density. Morphologically normal and abnormal spermatozoa have different densities. A mature morphologically normal spermatozoon has a slightly higher density of 1.10 g/mL whereas an immature and morphologically abnormal spermatozoon has a lower density between 1.06 and 1.09 g/mL. At end of centrifugation, each spermatozoon is situated at the gradient level that matches its density. As a result, the resulting interphases between seminal plasma and the 40% upper layer, containing the leukocytes, cell debris and 40% and 80% containing morphologically abnormal sperm with poor motility are discarded. The highly motile, morphologically normal, viable spermatozoa form a pellet at the bottom of the tube [4, 5]. Although sperm preparation can be accomplished using a number of techniques such as simple wash, swim-up and density gradient [5, 6], research shows that the latter consistently produces samples of the highest quality required for intrauterine insemination and for in vitro fertilization (IVF), which explains why it is the preferred processing method [713].

One of the common causes of infertility in men with normal semen parameters is abnormal sperm DNA. Fertility is not only based on absolute number of spermatozoa but also on the functional capability. A large number of indirect and direct methods are available to measure DNA damage. A positive relationship has been reported between poor semen parameters and DNA damage in spermatozoa indicating inherent problems occurring during spermatogenesis in patients [14]. Earlier studies utilizing TUNEL (terminal deoxytransferase mediated deoxyuridine triphosphate (dUTP) nick end-labeling)-coupled with flow cytometry as well as by comet have shown DNA fragmentation in unselected spermatozoa is related with abnormal sperm morphology [15]. Similar results were reported using the comet test indicating a strong causal link between sperm morphology and DNA damage. The TUNEL assay is increasingly being used in many laboratories [16, 17]. The majority of DNA damage is mainly caused by oxidative stress. Oxidative stress occurs when there is an imbalance between the amounts of reactive oxygen species (ROS) produced and the ability of the antioxidants to remove the excess levels of ROS [1821]. Oxidative stress can be induced due to infection both viral and bacterial, exposure to xenobiotics, tobacco and alcohol consumption. DNA fragmentation can occur during spermiogenesis. DNA damage can also be caused due to DNA packaging, or due to abortive apoptosis. Post-testicular sperm are more susceptible to DNA damage. The testicular sperm shows the lowest amount of DNA damage; it increases in epididymal and ejaculated sperm [1821].

Various authors have shown that high DNA fragmentation has an adverse effect on the outcome of assisted reproduction including fertilization rates, embryo cleavage, reduced implantation rate and increased miscarriage rates as well as increased incidence of disease in offspring [14, 2226]. The DNA damage results as reported by the TUNEL assay are in the range of 15% and 20% [16, 17, 22].

What is not known, however, is whether there is a difference in sperm quality and DNA damage amongst samples processed with various density gradient media. In fact, only one study has examined samples processed with multiple media simultaneously and under identical conditions [27]. Therefore, the aim of this study was to evaluate and compare sperm quality (% motility, total motile sperm (TMS), % recovery and DNA damage) following density gradient sperm preparation with three commonly used, commercially available media: PureCeption, ISolate, and SpermGrad-125.

Methods

This study was approved by the Institutional Review Board of the Cleveland Clinic. A total of 20 healthy male volunteers of unproven fertility were enrolled in the study (IRB 12-506).

All subjects were young healthy male volunteers aged 21-35 years. They completed a Donor Questionnaire that included multiple yes or no questions such as: undescended testis, mumps, testis infection, testicular injury, varicocele, fever, and sexually transmitted diseases. These donors were selected based on normal semen parameters according to the WHO 2010 criteria for count, motility and morphology. Each donor had at least two of the 3 sperm parameters normal i.e. ejaculate volume, sperm concentration, motility or morphology, to be included in the study. Also all subjects were checked for presence of leukocytospermia i.e. >1×106 white blood cells/mL. Subjects with >1×106 white blood cells/mL were excluded from the study.

Since we were comparing three different gradients, larger volumes were required for the sperm preparation. Additional sample was also required to process sample for measuring DNA damage before and after sperm processing on the three gradients. Therefore, we used individual normal healthy donors without any pooling. Also we chose not to use patient specimen for the comparison of three media to avoid ending up with poor recovery after separation and missing on the important end results, especially in patients with poor semen parameters such as volume, concentration and motility.

Sample collection

Semen samples were collected from the 20 donors following a period of sexual abstinence of 48 –72 hours. Each donor provided one sample only. Samples were collected in a private collection room at the Andrology laboratory by masturbation into sterile containers. The semen samples were allowed to liquefy completely for 20 minutes at 37°C before further processing. All samples were discarded after the experiment was completed.

Semen analysis

After liquefaction, a standard semen analysis was performed as per laboratory procedures. The quality of the specimens was assessed by evaluating sperm concentration, motility, morphology, presence of round cells according to WHO criteria [28]. A total amount of 5 μL of the sample was used for manual evaluation of motility using a MicroCell counting chamber (Vitrolife, San Diego, CA) using phase optics at X20 magnification. Equal volume of the same sample was aliquoted and layered on each sperm preparation media and the sperm separation performed under identical experimental conditions.

An aliquot of the sample was saved for measuring DNA damage before sperm processing as described below.

Sperm DNA damage

Terminal deoxynucleotidyl transferase-mediated fluorescein-dUTP nick end labeling (TUNEL) using the Apo-Direct™ kit (Pharmingen, San Diego, CA) was used to measure the extent of DNA damage as described earlier [16, 17]. Briefly, 1-2 million spermatozoa were resuspended in 3.7% paraformaldehyde and re-suspended in 70% ice-cold ethanol. Positive and negative kit controls as well as internal controls (specimens from donors and patients with known DNA damage) were included for each run. For the negative control, the TdT enzyme was omitted from the staining step for the positive control, DNA damage was induced by digestion with DNase I. The sample was incubated with 100 μL of DNase I (1 mg/mL) for 1 h at 37°C [29]. The staining solution contained terminal deoxytransferase (TdT) enzyme, TdT reaction buffer, fluorescein isothiocynate tagged deoxyuridine triphosphate nucleotides (FITC-dUTP) and distilled water (Figure 1). All specimens were further washed in rinse buffer to remove the unbound reaction solution, re-suspended in 0.5 mL of propidium iodide/RNase solution, and incubated for 30 minutes in the dark at room temperature followed by flow cytometric analysis.

Figure 1
figure 1

Schematics of TUNEL assay for measurement of DNA damage in spermatozoa.

All fluorescence signals of labeled spermatozoa were analyzed on a flow cytometer (fluorescence activated cell sorting [FACScan] (Becton Dickinson, San Jose, CA). A total of 10,000 spermatozoa were examined for each assay at a flow rate of <100 cells/sec. The excitation wavelength was 488 nm supplied by an argon laser at 15 mW. Green fluorescence (480–530 nm) was measured in the FL-1 channel and red fluorescence (580–630 nm) in the FL-2 channel. Spermatozoa/events obtained in the plots were gated using a forward-angle light scatter (FSC) and a side-angle light scatter (SSC) dot plot to gate out debris, aggregates, and other cells different from spermatozoa. TUNEL-positive spermatozoa in the population were measured after converting the data into a histogram. The percentage of positive cells (TUNEL-positive) were calculated on a 1,023-channel scale using the flow cytometer software FlowJo Mac version 8.2.4 (FlowJo, LLC, Ashland, OR) [16, 17].

Sperm preparation by density gradient

Three commonly used commercially available density gradients were used. These were PureCeption (Cooper Surgical, Trumbull, CT, United States) with 40% and 80% gradients; ISolate (Irvine Scientific, Santa Ana, CA, United States) with 50% and 90% gradient; and SpermGrad-125 (Vitrolife, San Diego, CA, United States) provided as a single 90% stock solution and then prepared for use as 45% and 90% gradient.

Components of the density gradient sperm separation procedure included a colloidal suspension of silica particles stabilized with covalently bonded hydrophilic Silane supplied in HEPES. There are two gradients: a lower phase (high density gradient) and an upper phase (low density gradient). Sperm washing medium (HTF; modified HTF with 5.0 mg/mL human albumin) was used to wash and resuspend the final pellet. Briefly, all components of the gradient i.e. upper and lower phase, sperm wash media and semen samples were placed in an incubator at 37°C for 20 minutes for equilibration [5]. Two mL of the lower phase gradient was transferred into a sterile conical–bottom, disposable centrifuge tube. A second 2 mL layer of the upper phase was then gently placed on top of the lower phase using a transfer pipette (Figure 2). A distinct line separating the two layers was observed. Up to 2 mL of liquefied semen was gently placed onto the upper phase. The sample was centrifuged for 20 minutes at 300g as described earlier [5]. The supernatant was discarded using a transfer pipette, and a pellet with approximately 0.5 mL was left in the conical-bottom tube. After the first centrifugation, 2 mL of HTF was transferred to resuspend the pellet. The pellet was gently mixed, and the sample was centrifuged for 7 minutes at 300g. After removing the supernatant, the final pellet was resuspended in 0.5 mL of HTF. After recording the final volume, the prewash and post-wash total motile sperm (TMS) and percent recovery and percent DNA damage was calculated [5].

Figure 2
figure 2

Schematics of sperm preparation by density gradient separation.

Total motile sperm was calculated as follows:

Statistical analysis

Sperm parameters were compared before and after processing for each media and also after processing amongst the three media groups. All values were reported as mean ± SD. Pairwise comparisons of groups were performed independently after applying Bonferroni correction. Pairwise group comparisons were significant for P < 0.017.

Results

Semen parameters (mean ± SD) were evaluated for ejaculate volume (3.7 ± 1.5 mL); sperm concentration (X 106/mL) (53.47 ± 32.00); presence of round cells (1.1 × 106/mL); negative for Leukoctyospermia i.e. presence of >106 white blood cells/mL of the seminal ejaculate; sperm morphology (3 ± 2 %) and percent motility (58 ± 9%). Table 1 lists the semen quality parameters percent motility, total motile sperm and recovery rates before and after separation by the three density gradient media.

Table 1 Semen quality parameters before and after separation by three different double density gradients

Sperm motility

We found significant differences in percent motility between pre-wash and prepared samples for samples prepared by ISolate (P < 0.0001) and SpermGrad-125 (P < 0.0001), while the increase in percent motility for PureCeption was milder and without statistical significance (P = 0.07). After sperm preparation, significantly higher motility was seen for samples prepared by ISolate (P < 0.0001) and SpermGrad-125 (P < 0.0001) compared to those prepared by PureCeption. Percent motility following preparation was slightly higher for SpermGrad-125 than ISolate (P = 0.031).

Total motile sperm

The number of total motile sperm obtained after separation by PureCeption and ISolate (14.2 ± 15.9 and 15.8 ± 18.2) was higher compared to samples prepared using SpermGrad-125 for TMS (10.6 ± 19.7), though only the difference between ISolate and SpermGrad-125 was statistically significant (P = 0.030).

Sperm recovery

The percentage recovery of total motile sperm after density gradient centrifugation was significantly higher in sperm prepared by PureCeption and ISolate (45.3% and 48.9%) compared to those separated using SpermGrad-125 (30.8%) (P < 0.01 for each).

Sperm DNA damage

All unprocessed samples presented low DNA damage (7.5% ± 9.2%). DNA damage was below the established cut-off value of 19% in over 80% (53/60) of the samples before processing. After sperm preparation, DNA fragmentation was comparable in the three gradients (PureCeption™ = 8.8% ± 4.7%, ISolate = 7.2% ± 5.2%, and SpermGrad-125™ = 11.2% ± 7.4%, respectively) (Figure 3).

Figure 3
figure 3

Schematics of the DNA damage by the TUNEL assay. (1) Labeling of DNA strand breaks with TdT, which catalyzes the polymerization of labeled nucleotides to free 3′-OH DNA ends in a template-independent manner (TUNEL reaction) and (2) Fluorescein isothiocynate (FITC)-dUTP is incorporated into nucleotide polymers, and it can be directly detected and quantified by flow cytometry.

We also examined the correlation between prewash DNA damage and percent recovery in the post wash sperm. Pureception: pre-wash DNA damage vs. % recovery: r = -0.11, p = 0.65; post-wash DNA damage vs. % recovery: r = 0.01, p = 0.96; Isolate: Pre-wash DNA damage vs. % recovery: r = -0.29, p = 0.24; Post-wash DNA damage vs. recovery: r = -0.34, p = 0.15; SpermGrad: pre-wash DNA damage vs. % recovery: r = -0.29, p = 0.23; Post-wash DNA damage vs. % recovery: r = -0.41, p = 0.09.

Discussion

The purpose of this study was to determine whether there was a difference in sperm quality after processing with three different density gradient media: PureCeption™, ISolate, and SpermGrad-125. Interestingly, ISolate and PureCeption were associated with the highest TMS and % recovery whereas % motility was higher in Isolate and SpermGrad-125. Pureception is comprised of an 80 percent (vol./vol.) or 40 percent (vol./vol.) sterile colloidal suspension of silica particles which are stabilized with covalently bound hydrophilic silane formulated in HEPES–buffered human tubal fluid (HTF). These new gradients are shown to have better recovery of TMS compared to the earlier formulation of 47% upper and 90% lower densities. In addition, this also contains taurine that promotes capacitation and protects sperm from generation of ROS and prevents against peroxidative damage thereby significantly decreasing the amount of DNA damage. It also contains EDTA, a Ca2+ ion chelator which also helps chelate harmful toxic divalent cations as well as reduces the harmful effects of ROS and DNA damage [30]. ISolate is also colloidal suspension of silica particles stabilized with covalently bound hydrophilic silane formulated in HEPES–buffered HTF. It comes as ready to use 50% (upper layer) and 90% (lower layer) concentration, however unlike Pureception, it does not contain any protein supplements. SpermGrad-125 is a stock medium from Vitrolife for preparation of the desired concentration of the upper and lower layers. It is stabilized with bicarbonate and HEPES buffered medium containing silane-coated, colloid silica particles.

Our results showed that all three media improved % motility, TMS, % recovery and DNA damage, which supports previous evidence that density gradient can retrieve high quality motile sperm with little DNA damage [2, 14, 24, 3133]. However, there was no significant difference in DNA damage in semen specimens prepared from normozoospermic males across the three media. In 2 of our subjects, we observed increased DNA damage (35% and 29%) before sperm preparation; however this was significantly reduced to 20% and 16% respectively after sperm preparation. We anticipate a similar decrease in the extent of DNA damage when using patient specimen for sperm preparation.

Zini et al. [8, 9] compared the sperm preparation by density gradient and swim up methods and found that sperm preparation by density gradient using Percoll resulted in higher percentage of DNA damage compared to those separated by swim-up although both resulted in a superior population of highly motile and normal sperm. These authors attributed this to the production of ROS due to centrifugation and induction of sperm capacitation. Contrary to these findings, another study reported an improvement in DNA integrity following sperm preparation by swim up and density gradient using Pureception [7]. Jayaraman et al. examined 51 subjects with normospermia, oligozoospermia and teratozoospermia and found no difference in the incidence of increased DNA damage in all three groups suggesting comparable results as all resulted in enrichment of sperm with intact chromatin [7].

Zhang et al. [34] reported that sperm preparation by swim up and density gradient using Puresperm resulted in a similar extent of DNA damage, although the stability of sperm separated by density gradient was superior and lasted up to 8 hours compared to those prepared by swim up. They attributed differences in sperm DNA fragmentation dynamics in sperm preparation by different techniques. Similarly, Enciso et al. [13] reported the sperm preparation by density gradient using SpermGrad and by swim up were equally effective in eliminating spermatozoa containing double strand DNA damage and sperm with highly damaged DNA (both single and double strand DNA damage), density gradient was more effective in eliminating single-strand DNA damage compared with swim up technique. Contrary to above reports, Stevanto et al. [35] compared DNA damage before and after sperm preparation using ISolate in 35 patients presenting for ART. These investigators observed an increase in DNA damage in at-least one-third of the subjects, a decrease in another one third and no change in the remaining subjects.

In a study by Chiamchanya et al. [27] three commercially available media were used to compare sperm motility, sperm with normal morphology and DNA damage and protamine deficiency after sperm preparation in 28 infertile patients. The selected sperm preparation media were: PureSperm (Nidacon, Gothenburg, Sweden), Sil-Select Plus (Fertipro, Beernrem, Belgium) and SpermGrad (Vitrolife, Gothenburg, Sweden). The authors reported a significant improvement in sperm motility (both rapid and progressive) and percentage of sperm with normal morphology. PureSperm gave the best results. DNA damage decreased in PureSperm and Sil-Select by 17.9% and 31.3% respectively. Contrary to our studies, they reported a significant increase (56.3%) in DNA damage after separation on SpermGrad. Percentage DNA damage was negatively correlated with percentage of sperm motility, rapid motility and progressive motile sperm concentration. They also examined protamine deficiency and found PureSperm to perform the best. For DNA damage Sil-Select was seen to be the most efficient in reducing DNA damage.

It is especially critical to asses DNA damage before and after sperm preparation individually in subjects presenting for ART as the dynamics of sperm DNA damage may be different depending on the presence of abnormal morphology, sperm concentration and presence of oxidative stress. High levels of DNA damage are positively correlated with lower fertilization and poor implantation rates, miscarriage and recurrent pregnancy loss [1012, 14, 24, 31, 36, 37].

The current study is significant in that it assessed sperm quality in three sperm preparation media commonly used in infertility clinics under identical conditions. Our results are encouraging that the sperm preparation process irrespective of the type of density gradient used does not induce any significant increase in sperm DNA damage. In a clinical setting, it is extremely important to evaluate DNA damage prior to sperm preparation. Subjects who present with significant amount of DNA damage prior to sperm preparation may exhibit sperm amount of DNA damage after sperm preparation. One limitation of our study was that most of the men (18 of 20) initially presented with low DNA damage (<19%). Examining infertile men who demonstrate DNA damage in their semen samples prior to sperm preparation will be important to rule out DNA damage induced as a result of sperm preparation with these gradients.

Conclusions

Based on our results we conclude that all three sperm processing media produce samples of good quality and low DNA damage. DNA damage must be evaluated in individual subjects before and after sperm preparation as each subject undergoing ART may present with unique DNA dynamics and the improvement in sperm DNA integrity may be different depending on initial quality of semen such as poor morphology.

References

  1. Vanage GR, Gopalkrishnan K, Sheth AR: Effect of antibodies to human seminal plasma inhibin on spermatogenesis and sperm agglutination in adult male rats. Mol Reprod Dev. 1990, 25: 227-236. 10.1002/mrd.1080250304.

    Article  CAS  PubMed  Google Scholar 

  2. Levay PF, Fourie FR, Meintjes J: The effect of seminal plasma on human sperm-zona pellucida binding. Hum Reprod. 1995, 10: 2590-2594.

    CAS  PubMed  Google Scholar 

  3. Gil-Guzman E, Ollero M, Lopez MC, Sharma RK, Alvarez JG, Thomas AJ, Agarwal A: Differential production of reactive oxygen species by subsets of human spermatozoa at different stages of maturation. Hum Reprod. 2001, 16: 1922-1930. 10.1093/humrep/16.9.1922.

    Article  CAS  PubMed  Google Scholar 

  4. Allamaneni SS, Agarwal A, Rama S, Ranganathan P, Sharma RK: Comparative study on density gradients and swim-up preparation techniques utilizing neat and cryopreserved spermatazoa. Asian J Androl. 2005, 7: 86-92. 10.1111/j.1745-7262.2005.00008.x.

    Article  PubMed  Google Scholar 

  5. Beydola T, Sharma RK, Lee W, Agarwal A: Sperm preparation and selection techniques. Male Infertility Practice. Edited by: Rizk B, Aziz N, Agarwal A. 2013, New Delhi: Jaypee Brothers Medical Publishers, 244-251.

    Google Scholar 

  6. Boomsma CM, Heineman MJ, Cohlen BJ, Farquhar C: Semen preparation techniques for intrauterine insemination. Cochrane Database Syst Rev. 2004, 3: CD004507-

    PubMed  Google Scholar 

  7. Jayaraman V, Upadhya D, Narayan PK, Adiga SK: Sperm processing by swim-up and density gradient is effective in elimination of sperm with DNA damage. J Assist Reprod Genet. 2012, 29: 557-563. 10.1007/s10815-012-9742-x.

    Article  PubMed Central  PubMed  Google Scholar 

  8. Zini A, Nam RK, Mak V, Phang D, Jarvi K: Influence of initial semen quality on the integrity of human sperm DNA following semen processing. Fertil Steril. 2000, 74: 824-827. 10.1016/S0015-0282(00)01495-3.

    Article  CAS  PubMed  Google Scholar 

  9. Zini A, Finelli A, Phang D, Jarvi K: Influence of semen processing technique on human sperm DNA integrity. Urology. 2000, 56: 1081-1084. 10.1016/S0090-4295(00)00770-6.

    Article  CAS  PubMed  Google Scholar 

  10. Bungum M, Spanò M, Humaidan P, Eleuteri P, Rescia M, Giwercman A: Sperm chromatin structure assay parameters measured after density gradient centrifugation are not predictive for the outcome of ART. Hum Reprod. 2008, 23: 4-10.

    Article  CAS  PubMed  Google Scholar 

  11. Brahem S, Mehdi M, Landolsi H, Mougou S, Elghezal H, Saad A: Semen parameters and sperm DNA fragmentation as causes of recurrent pregnancy loss. Urology. 2011, 78: 792-796. 10.1016/j.urology.2011.05.049.

    Article  PubMed  Google Scholar 

  12. Brahem S, Mehdi M, Elghezal H, Saad A: Semen processing by density gradient centrifugation is useful in selecting sperm with higher double-strand DNA integrity. Andrologia. 2011, 43: 196-202. 10.1111/j.1439-0272.2010.01050.x.

    Article  CAS  PubMed  Google Scholar 

  13. Enciso M, Iglesias M, Galán I, Sarasa J, Gosálvez A, Gosálvez J: The ability of sperm selection techniques to remove single- or double-strand DNA damage. Asian J Androl. 2011, 13: 764-768. 10.1038/aja.2011.46.

    Article  PubMed Central  CAS  PubMed  Google Scholar 

  14. Lopes S, Sun JG, Jurisicova A, Meriano J, Casper RF: Sperm deoxyribonucleic acid fragmentation is increased in poor-quality semen samples and correlates with failed fertilization in intracytoplasmic sperm injection. Fertil Steril. 1998, 69: 528-532. 10.1016/S0015-0282(97)00536-0.

    Article  CAS  PubMed  Google Scholar 

  15. Muratori M, Piomboni P, Baldi E, Filimberti E, Pecchioli P, Moretti E, Gambera L, Baccetti B, Biagiotti R, Forti G, Maggi M: Functional and ultrastructural features of DNA-fragmented human sperm. J Androl. 2000, 21: 903-912.

    CAS  PubMed  Google Scholar 

  16. Sharma RK, Sabanegh E, Mahfouz R, Gupta S, Thiyagarajan A, Agarwal A: TUNEL as a test for sperm DNA damage in the evaluation of male infertility. Urology. 2010, 76: 1380-1386. 10.1016/j.urology.2010.04.036.

    Article  PubMed  Google Scholar 

  17. Sharma RK, Agarwal A: Laboratory evaluation of sperm chromatin: TUNEL assay. Sperm Chromatin: Biological and Clinical Applications in Male Infertility and Assisted Reproduction. Edited by: Zini A, Agarwal A. 2011, New York: Springer Science + Business Media, 201-215.

    Chapter  Google Scholar 

  18. Mahfouz R, Sharma R, Thiyagarajan A, Kale V, Gupta S, Sabanegh E, Agarwal A: Semen characteristics and sperm DNA fragmentation in infertile men with low and high levels of seminal reactive oxygen species. Fertil Steril. 2010, 94: 2141-2146. 10.1016/j.fertnstert.2009.12.030.

    Article  CAS  PubMed  Google Scholar 

  19. Agarwal A, Varghese AC, Sharma RK: Markers of oxidative stress and sperm chromatin integrity. Methods Mol Biol. 2009, 590: 377-402. 10.1007/978-1-60327-378-7_24.

    Article  CAS  PubMed  Google Scholar 

  20. Makker K, Agarwal A, Sharma R: Oxidative stress & male infertility. Indian J Med Res. 2009, 129: 357-367.

    CAS  PubMed  Google Scholar 

  21. Abd-Elmoaty MA, Saleh R, Sharma R, Agarwal A: Increased levels of oxidants and reduced antioxidants in semen of infertile men with varicocele. Fertil Steril. 2010, 94: 1531-1534. 10.1016/j.fertnstert.2009.12.039.

    Article  CAS  PubMed  Google Scholar 

  22. Benchaib M, Ajina M, Lornage J, Niveleau A, Durand P, Guérin JF: Quantitation by image analysis of global DNA methylation in human spermatozoa and its prognostic value in in vitro fertilization: a preliminary study. Fertil Steril. 2003, 80: 947-953. 10.1016/S0015-0282(03)01151-8.

    Article  PubMed  Google Scholar 

  23. Virant-Klun I, Tomazevic T, Meden-Vrtovec H: Sperm single-stranded DNA, detected by acridine orange staining, reduces fertilization and quality of ICSI-derived embryos. J Assist Reprod Genet. 2002, 19: 319-328. 10.1023/A:1016006509036.

    Article  PubMed Central  PubMed  Google Scholar 

  24. Sun JG, Jurisicova A, Casper RF: Detection of deoxyribonucleic acid fragmentation in human sperm: correlation with fertilization in vitro. Biol Reprod. 1997, 56: 602-607. 10.1095/biolreprod56.3.602.

    Article  CAS  PubMed  Google Scholar 

  25. Larson KL, DeJonge CJ, Barnes AM, Jost LK, Evenson DP: Sperm chromatin structure assay parameters as predictors of failed pregnancy following assisted reproductive techniques. Hum Reprod. 2000, 15: 1717-1722. 10.1093/humrep/15.8.1717.

    Article  CAS  PubMed  Google Scholar 

  26. Lewis SE, Aitken RJ: DNA damage to spermatozoa has impacts on fertilization and pregnancy. Cell Tissue Res. 2005, 322: 33-41. 10.1007/s00441-005-1097-5.

    Article  CAS  PubMed  Google Scholar 

  27. Chiamchanya C, Kaewnoonual N, Visutakul P, Manochantr S, Chaiya J: Comparative study of the effects of three semen preparation media on semen analysis, DNA damage and protamine deficiency, and the correlation between DNA integrity and sperm parameters. Asian J Androl. 2010, 12: 271-277. 10.1038/aja.2009.60.

    Article  PubMed Central  PubMed  Google Scholar 

  28. World Health Organization: WHO Laboratory Manual for the Examination and Processing of Human Semen. Geneva, Switzerland, 5

  29. Sharma R, Masaki J, Agarwal A: Sperm DNA fragmentation analysis using the TUNEL assay. Methods Mol Biol. 2013, 927: 121-136. 10.1007/978-1-62703-038-0_12.

    Article  CAS  PubMed  Google Scholar 

  30. Chi HJ, Kim JH, Ryu CS, Lee JY, Park JS, Chung DY, Choi SY, Kim MH, Chun EK, Roh SI: Protective effect of antioxidant supplementation in sperm-preparation medium against oxidative stress in human spermatozoa. Hum Reprod. 2008, 23: 1023-1028. 10.1093/humrep/den060.

    Article  CAS  PubMed  Google Scholar 

  31. Benchaib M, Lornage J, Mazoyer C, Lejeune H, Salle B, François Guerin J: Sperm deoxyribonucleic acid fragmentation as a prognostic indicator of assisted reproductive technology outcome. Fertil Steril. 2007, 87: 93-100. 10.1016/j.fertnstert.2006.05.057.

    Article  CAS  PubMed  Google Scholar 

  32. Li Z, Zhou Y, Liu R, Lin H, Liu W, Xiao W, Lin Q: Effects of semen processing on the generation of reactive oxygen species and mitochondrial membrane potential of human spermatozoa. Andrologia. 2012, 44: 157-163. 10.1111/j.1439-0272.2010.01123.x.

    Article  CAS  PubMed  Google Scholar 

  33. Marchesi DE, Biederman H, Ferrara S, Hershlag A, Feng HL: The effect of semen processing on sperm DNA integrity: comparison of two techniques using the novel Toluidine Blue assay. Eur J Obstet Gynecol Reprod Biol. 2010, 151: 176-180. 10.1016/j.ejogrb.2010.05.003.

    Article  CAS  PubMed  Google Scholar 

  34. Zhang XD, Chen MY, Gao Y, Han W, Liu DY, Huang GN: The effects of different sperm preparation methods and incubation time on the sperm DNA fragmentation. Hum Fertil (Camb). 2011, 14: 187-191. 10.3109/14647273.2011.604817.

    Article  CAS  Google Scholar 

  35. Stevanato J, Bertolla RP, Barradas V, Spaine DM, Cedenho AP, Ortiz V: Semen processing by density gradient centrifugation does not improve sperm apoptotic deoxyribonucleic acid fragmentation rates. Fertil Steril. 2008, 90: 889-890. 10.1016/j.fertnstert.2007.01.059.

    Article  PubMed  Google Scholar 

  36. Lewis SE, Simon L: Clinical implications of sperm DNA damage. Hum Fertil (Camb). 2010, 13: 201-207. 10.3109/14647273.2010.528823.

    Article  Google Scholar 

  37. Jiang H, He RB, Wang CL, Zhu J: The relationship of sperm DNA fragmentation index with the outcomes of in-vitro fertilisation-embryo transfer and intracytoplasmic sperm injection. J Obstet Gynaecol. 2011, 31: 636-639. 10.3109/01443615.2011.590910.

    Article  CAS  PubMed  Google Scholar 

Download references

Acknowledgments

The authors are grateful to Jeff Hammel, statistician, for his contribution to data analysis and Amy Moore for editorial assistance. Authors are thankful to the staff of the Andrology Center for their help in recruiting and scheduling the normal donors for this project. This study was supported by financial support from the Center for Reproductive Medicine, Cleveland Clinic.

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Ashok Agarwal.

Additional information

Competing interests

All authors declare no competing financial interests.

Authors’ contributions

AA conceived the idea, supervised the study, and edited the article for submission. HM conducted the study and helped with the writing of manuscript, and preparation for submission. RKS helped with the review and editing of the manuscript. AA and MAE helped in data analysis and manuscript revision. All authors read and approved the final manuscript.

Authors’ original submitted files for images

Below are the links to the authors’ original submitted files for images.

Authors’ original file for figure 1

Authors’ original file for figure 2

Authors’ original file for figure 3

Rights and permissions

Open Access  This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made.

The images or other third party material in this article are included in the article’s Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder.

To view a copy of this licence, visit https://creativecommons.org/licenses/by/4.0/.

The Creative Commons Public Domain Dedication waiver (https://creativecommons.org/publicdomain/zero/1.0/) applies to the data made available in this article, unless otherwise stated in a credit line to the data.

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Malvezzi, H., Sharma, R., Agarwal, A. et al. Sperm quality after density gradient centrifugation with three commercially available media: a controlled trial. Reprod Biol Endocrinol 12, 121 (2014). https://doi.org/10.1186/1477-7827-12-121

Download citation

  • Received:

  • Accepted:

  • Published:

  • DOI: https://doi.org/10.1186/1477-7827-12-121

Keywords